TMC 16 Pound 1911 Recoil Spring – Commander

TMC 16 Pound Recoil Spring – Commander

Keep your 1911 Commander operating like new with the TMC 16 Pound Recoil Spring. Replacing your recoil spring regularly helps prevent wear and tear on your frame and slide. Because this spring fits over the guide rod, it controls how the slide cycles, ensuring smooth and reliable operation with every shot.

Why Proper Recoil Spring Matters

Recoil springs affect how your pistol handles recoil. Heavy loads need heavier springs, while lighter loads require lighter springs. If the spring is too light, the slide can open and close too quickly, increasing felt recoil and stressing the frame. Conversely, a spring that is too heavy may make the slide difficult to operate or even prevent it from cycling properly, causing jams. Therefore, choosing the correct spring is crucial for reliable performance.

Maintenance and Longevity

TMC recommends replacing the recoil spring every 5,000 to 10,000 rounds. Check for wear by measuring free length: if the spring has lost 0.500 inches, it has suffered a significant reduction in tension and should be replaced. Independent testing shows TMC springs can endure over 100,000 compression cycles, though routine annual replacement is advised to maintain optimal performance.

Avoid Spring Buffers

TMC does not recommend using spring buffers in a 1911. Buffers act as a temporary fix for worn springs and can reduce slide travel, negatively impacting feeding reliability. Buffers may also break during firing, potentially causing malfunctions. Installing a fresh spring is the best solution for consistent function and safety.

American-Made Quality

This recoil spring is manufactured in the USA by a leading gun spring producer. Each spring meets strict quality standards, providing long-lasting durability and reliable slide control for your 1911 Commander.

Key Features

• Designed for 1911 Commander pistols

• 20-pound recoil spring for standard loads

• Controls slide cycling for smooth, reliable operation

• American-made by a top gun spring manufacturer

• Replace every 5,000–10,000 rounds or if compressed 0.500”

• Not recommended for use with buffers

Installing the TMC 16 Pound Recoil Spring ensures your 1911 Commander performs consistently, safely, and reliably. Regular maintenance with quality springs protects your firearm while improving shooting performance.