Challis Hex Drive Bushing, Stainless, Oversize, 4 pieces

Challis Hex Drive Bushing, Stainless, Oversize, 4 pieces

Use when the bushing threads in frame have been stripped. Frame must be tapped with oversize threads before use. The easiest fix available for a stripped frame. For grips not less than 0.245″ thick.

• EASY.  The bushings can be installed quickly. Just slip one into the socket of a 7/32” nut driver and turn it into place.
• ACCURATE.  Since the socket holds the bushing in proper alignment, it is easy to accurately engage the threads. There is no need to start the bushing by hand and then finish the job with a driver.
• STRONG.  Unlike conventional bushings with a screwdriver slot, the hex head is strong enough to drive the bushing firmly into place without the risk of raising a burr or otherwise deforming the top of the bushing.
• STABLE.  Sufficient torque can be applied to properly seat the bushing and thereby minimize retraction under the shock of discharge. This is especially valuable with grips made of G10, aluminum and other heavy materials.
• REMOVABLE.  The bushing can be easily removed with a 7/32” nut driver or socket.  No special removal tools, no easy-outs and no trashed bushings or damaged frames.
• REUSABLE.  If needed, the bushings can be removed for refinishing the frame and reinstalled, eliminating the need to purchase replacement bushings.