EGW Heavy Duty 1911 Extractor 9mm/38/40 Series 80 Blued

EGW Heavy Duty 1911 Extractor – 9mm / .38 Super / .40 S&W

Series 80 – Blued

Modern steel technology is vastly superior to what existed when the original 1911 was designed. Today, improved alloys, tighter machining tolerances, and advanced heat-treating processes allow critical parts to last longer and function more consistently. Because of these advancements, EGW redesigned the 1911 extractor from the ground up rather than simply copying outdated geometry.

By using controlled furnaces, vacuum heat treatment, and precision CNC machining, EGW produces a Heavy Duty Extractor that not only delivers exceptional strength but also maintains consistency and reliability over an extremely long service life.

---

Why Standard 1911 Extractors Eventually Fail

During normal firing, a traditional 1911 extractor rides up the relief groove of the cartridge case. Over time, this repeated contact causes unnecessary wear on the extractor hook. As a result, performance slowly degrades.

Consequently:

• The extractor hook loses its sharp edge

• Tension gradually weakens

• Extraction becomes less consistent

• Malfunctions and stoppages occur more frequently

Therefore, if you find yourself constantly re-tensioning an extractor, it is no longer performing as intended. At that point, replacement becomes the most reliable solution.

---

EGW Addresses the Root Cause of Wear

Rather than masking symptoms, EGW corrected the underlying design issue. Specifically, EGW reduced the distance from the bolt face to the extractor hook. Because of this adjustment, the hook no longer slams into the case during cycling.

As a result:

• The hook stays sharper for far longer

• Tension remains stable over high round counts

• Extraction stays smooth and predictable

• Overall reliability increases significantly

This single design improvement dramatically extends extractor life while improving performance.

---

Stronger, Smarter Hook Geometry

Most standard extractors rely on a straight, 90-degree hook cut. However, right angles naturally create stress risers. Therefore, EGW takes a different approach.

Instead, EGW machines the hook at an acute angle. Consequently, the hook gains more contact surface on the case rim, which leads to more positive and controlled extraction.

Additionally, EGW incorporates radiused cuts on both sides of the hook. These rounded transitions distribute stress more evenly and reduce the chance of cracking. Most importantly, the inside corner—where failures commonly start—features a smooth radius for added durability.

As a result, the hook is not only stronger but also far more resistant to fatigue.

---

Vacuum Heat-Treated for Exceptional Longevity

To further enhance performance, EGW vacuum heat-treats each extractor. This advanced process minimizes internal stress while preserving spring characteristics.

Because of this treatment:

• Extractor tension remains consistent

• Metal fatigue develops more slowly

• Long-term performance stays predictable

In fact, this extractor can maintain proper tension for 70,000+ rounds, even in high-volume pistols.

---

Key Features & Benefits

 Redesigned hook position to minimize wear
Acute-angle hook for stronger case engagement
Radiused hook geometry for added strength
 Vacuum heat-treated for long spring life
Heavy-duty design for high round counts
Blued finish for a traditional appearance

---

Specifications

• Caliber: 9mm / .38 Super / .40 S&W

• Type: Heavy Duty Extractor

• Series: 80

• Finish: Blued

• Heat Treatment: Vacuum heat-treated

• Compatibility: Series 80 1911 pistols

---

Why Choose the EGW Heavy Duty Extractor?

EGW focuses on solving real mechanical problems, not just replicating legacy designs. Consequently, this Heavy Duty Extractor lasts longer, holds tension more reliably, and significantly improves extraction consistency.

Ultimately, if you want a proven, long-lasting extractor upgrade for your Series 80 1911, the EGW Heavy Duty 1911 Extractor is a smart, performance-driven choice.